IPSW8+8POE – 16 port switch with 8 POE


Out of stock


Hardware Specifications 
Fast Ethernet Ports 16 10/ 100Base-TX RJ-45 Auto-MDI / MDI-X ports
Power over Ethernet ports 8-Port with PoE injector function (Port 1 to port 8)
Switch Processing Scheme Store-and-Forward
Throughput (packet per second) 2.38Mpps
Switch fabric 3.2Gbps
Address Table  4K entries
Share data Buffer  2.75Mb embedded memory for packet buffers
Flow Control  Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
Dimensions (W x D x H) 440 x 120 x 44 mm (1U height)
Weight 1.75 kg
Power Requirements  100-240V AC, 50-60 Hz, 1A
System Operating Power Consumption / Dissipation (Full load) 123 watts / 419.43BTU
Temperature Operating: 0~50 degrees C
Storage: -40~70 degrees C
Humidity Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type End-Span
PoE Power Output Per Port 48V DC, 350mA. Max. 15.4 watts
Power Pin Assignment 1/2(+), 3/6(-)
Power Budget 110 watts
Smart functions 
System Configuration  Web interface
Alert Trap SNMP Trap for alarm notification of events
Port configuration Port speed duplex mode selection. Flow control disable / enable. Port disable / enable. Port description on each port
Bandwidth Control Yes, 1Mbps / 2Mbps / 4Mbps / 8Mbps / 16Mbps / 32Mbps / 64Mbps
Broadcast Storm Control Yes, 5% / 10% / 25% / 50% / Disable
Port Statistics Display each port’s detail Ethernet traffic counter information
VLAN 16 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
Port trunking Supports 2 groups of 4-Port trunk support, up to 800Mbps bandwidth per trunk
Port Mirroring Port mirroring allows monitoring of the traffic across any port in real time
QoS Allows to assign low / high priority on each port
First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy
MAC address / TCP & UDP filter Yes
IGMP Snooping v1 / v2 Allows to disable or enable
PoE power control Allows to disable or enable power provision and assign priority on each PoE port
Standards Conformance 
Regulation Compliance  FCC Part 15 Class A, CE
Standards Compliance  IEEE 802.3:Ethernet
IEEE 802.3u:Fst Ethernet
IEEE 802.3x:Full-duplex Flow control
IEEE 802.3af:Power over Ethernet
IEEE 802.1p:QoS

Additional information

Weight 1 kg


There are no reviews yet.

Be the first to review “IPSW8+8POE – 16 port switch with 8 POE”

Your email address will not be published. Required fields are marked *

You may also like…